Search    Home | Register | Login | Join | Trade | Forum | Cart


  < Back

     HONG YI CO., LTD. 

     About this company : Worked on Grinder Pumps during early1960's,the beginning of the low pressure Sewer Grinder market, at that time there were only 2 major companies manufacturing grinder pumps during this time period. One company utilized progressive cavity design; the second company utilized conventional centrifugal designs.

     Contact : Miss Lin, Sales Manager 
     Headquarters : No.20-133 Ko-His Liao, Shuishang Hs, Chia-Yi Hsien, 608, Taiwan, Republic of China
     Phone : 886-5-2843529, Fax : 886-5-2843530 
     Website : Log on to trade instantly , Email : Log on to trade instantly

     Inline Sediment Filter Inline Sediment Filter na

Inline Sediment Filter Adapters 3/4 inch
to 1-1/2 inch Pipe Size Replacable Stainless Filter

  > Add to cart


     1/3 HP Effluent Pumps 1/3 HP Effluent Pumps SPE3 Series

SPE3 Series
1/3 HP Effluent Pumps
1/2" Solids Handling
Heavy Duty Lip & Mechanical Seals in Tandem
115 & 230 Volts available
60Hz
Durable Cast Iron Motor Housing
115 & 230 Volt Piggyback Power Plug and Switch
Plug w/20' Cord as Standard


  > Add to cart


     2 HP Grinder Pump 2 HP Grinder Pump DSGP1-2021-60Hz, DSGP1-2023-60Hz

DSGP1-2021-60Hz
DSGP1-2023-60Hz
2 HP Grinder Pump
Double Mechanical Seal
Silicon Carbide (Main) Grit
Resistant
Carbon Ceramic (Secondary)
Dual Sealing Chambers with
Moisture Detection for Optimum
Motor Protection Ductile iron
Impeller, Recessed, Clog-Free
30 Year Proven Design
Stainless Steel Grinder Assembly
Effectively Macerates Domestic
Into a Fine Slurry

  > Add to cart


     4 4" Non-Clog Wastewater Pumps 42MPR-60Hz

42MPR-60Hz
4" Non-Clog Wastewater Pumps
3" Solids Handling
FREE-FLOW IMPELLER DESIGN Clog-Free
Combined Benefits of Recessed and
Vaned Impeller Designs
Outperforms Enclosed or Semi-Open
Impeller Designs
Capacities to 425 GPM Heads to 100 Feet
3. 5 & 7.5 HP Models

  > Add to cart


     DIGP 75HP Grinder Pump DIGP 75HP Grinder Pump DIGP-7023/7043-60Hz

DIGP-7023/7043-60Hz (PATENTED)
AVAILABLE WITH
7.5 HP Grinder Pump
High Head, Double Stage
Doubled Output Pressure
Unmatched Performance
350 Shut-off Head
Flows to 100 gpm
Balanced Design
Ideal for Long Discharge Runs or High Static
Heads
Potentially Replaces Higher HP Pumps
Ductile Iron Impeller, Recessed, Clog-Free
Silicon Carbide Seals Grit Resistant

  > Add to cart


     GP1 e-one grinder pump GP1 e-one grinder pump GP1 FOR E-ONE

E-ONE is a registered trademark of
Enviroment One Corporation Which is
not affiliated with Keener Grinder Pumps

  > Add to cart


     GP1-2021  2 HP Grinder Pump GP1-2021 2 HP Grinder Pump GP1-2021 , GP1-2023-60Hz

GP1-2021 / GP1-2023-60Hz
2 HP Grinder Pump

2 Piece Motor Housing
Separate Cord Cap Assembly
Internal Capacitors - No Control Box Req'd
Ductile Iron Impeller, Recessed, Clog-Free
Silicon Carbide Seal - Grit Resistant
Secondary Lip Seal - Added Protection
Stainless Steel Grinder Assembly Effectively Macerates Domestic Sewage Into a Fine Slurry
40year Proven Design

  > Add to cart


     High Head Grinder Pumps High Head Grinder Pumps HHGP-60Hz

HHGP-60Hz
8、10、15、20HP
High Head Grinder Pumps High Heads to 260 Feet
Ideal for Long
Discharge Runs or High Static Heads
Double Mechanical Seal
Heavy Duty 3-Bearing Support System
Clog-free, Recessed Ductile Iron Impeller
Proven Design, Effectively Macerates Sewage into a Fine Slurry

  > Add to cart


     Keener portable Pump   Keener portable Pump DC12-12

PUMP:
This pump unit is a totally enclosed, submersible .,Pumping unit. It is powered by a 0.3 hp. 12 volt
DC, 20 Ampere motor. Battery clamps on the power cord for ease of connection to any 12 volt vehicle battery.
SWITCH:
The ON OFF switch is located inline on the power Cord.
BATTERY CONNECTION:
Check the position of the ON-OFF switch make certain the switch is in the OFF position befor connecting to the battery, using this connection procedure arcing is eliminated. Connect the RED battery clamp to the POSITIVE battery terminal. Connect the BLACK
Clamp to the NEGATIVE or ground to a rigid metallic Surface on the engine. The connection should be 12 to 19 inches from the battery.
HOSE:
Since the pump has a lower discharge pressure it is .,Recommended that anoncolapsiable hose be used for Maximum pumping capacity.
HOISTING & LOWERING:
Use the attached nylon line. Do not use the power cord .,For handling the unit.
OPERATION OF UNIT:
Lower the unit into the liquid to be pumped(NOTE: THIS UNIT IS NOT TO USED TO PUMP
FLAMABLE LIQUIDS).Then turn on the switch.
Pump can be run for a few minutes(less than 5) Without liquid. Do Not run completely dry for any extended period(less than 5 Min.).This will prevent.
RUNNING TIME PEROIDS:
The unit draws 20-25 amperes and can be operated for Approximately 1 Hr. on a fully charged 60 Amp-Hour Battery and still be able to start the vehicle under normal conditions. CAUTION should be used when running times exceeds 25 30 minutes without the engine running to recharge the battery. Also be mindful of COLD temperatures which lowers battery efficiency. Review Battery size(AMP-Hour rating) and the use of other Accessories, lights , radios. etc while operating pump Without engine operating.
OVERLOAD PROTECTION:
Overload protection is provided with an INLINE 25 AMP FUSE. Location is approximately 6 Inches below the RED(POSITIVE) battery .,Clamp Unit uses Std. Automotive 25 amp Fuses.

  > Add to cart


     Vertical Float Switch Vertical Float Switch VFS - 120

Vertical Float Switches
Model VFS - 120 Pump Down Float Switch

This mechanically activated pump switch is designed for direct control of pumps in non-potable water and sewage applications. It works well in applications with limited space such as: small sump chambers, effluent applications, and laundry trays, as well as in large tanks.
 
Pump switch is not sensitive to turbulence.
It is available for pump down applications only.
 
Mechanically activated.
Heavy-duty contacts.
Adjustable pumping range of .75 to 6.5 inches (2 to 17cm).
Controls pumps up to 3/4 HP at 120 VAC and 1HP at 230VAC.
Maximum operating temperature 125F.

  > Add to cart


Page 1 of 1
  ^ Back to top

   Bookmark and Share



About MarginUp | Register | Login | Join | Trade | Forum | Cart 
MobileNew! | Know-How | SOAOnDemand Now! | VAR 360 | RSS Feed 

  Copyright © 2017 MarginUp All Rights Reserved.
MarginUp User Agreement and Privacy Policy.